I’ve had the chance to test the card, and although it holds up compared to the rest of Nvidia’s lineup and the competition from AMD, its features are what make the RTX 3050 stand apart. With rumors of increased supply and an attractive list price, the RTX 3050 may be an antidote to the GPU shortage that budget gamers have been waiting for.
MSRP $249.00
“The RTX 3050 is a return to budget GPUs for Nvidia, with solid performance that’s bolstered by DLSS.”
Pros
- Solid 1080p gaming performance
- Low list price
- Supports DLSS
- Decent ray tracing
Cons
- Prices will likely be high
- Minor stuttering in memory-intensive games
Pricing and availability
Nvidia didn’t release a reference design for the RTX 3050, but the company still set a list price of $249. There is a swath of options from board partners, including graphics cards from EVGA, PNY, Colorful, and Asus. I got my hands on the EVGA RTX 3050 XC Black, which is available now for $249.
My card arrived with the incorrect BIOS, the one meant for the slightly more expensive EVGA RTX 3050 XC. This BIOS comes with a 68MHz boost to the clock speed. It’s a difference, but not more than 3% at the most extreme, and you can easily make it up by manually overclocking.
Like all graphics cards in 2022, you should expect the RTX 3050 to sell out immediately. The saving grace is that there are models available on launch day for list price. That’s cheaper than you can buy almost any graphics card right now, including options that are several years old.
On paper, the RTX 3050 is $50 more expensive than the recently released AMD RX 6500 XT. I haven’t had a chance to test AMD’s card yet, but the swath of benchmarks I’ve seen show that the RTX 3050 earns its higher price. The extra $50 buys you not only a more powerful GPU but also Nvidia Deep Learning Super Sampling (DLSS) and ray tracing that isn’t terrible.
The RTX 3050 is a better value than the RX 6500 XT.
If you can get an RTX 3050 for $250, you should — there isn’t a better value in today’s GPU market. That’s not the reality for most, though. Once the initial stock has made its way into the hands of scalpers, you can expect to pay double the list price. The RTX 3060, for example, sells for around $750 on the secondhand market.
For the RTX 3050, I anticipate secondhand prices around $500. If that’s the case, the RX 6500 XT will sell for around $100 to $150 less. Still, the RTX 3050 is a better value in my eyes. The performance of the RTX 3050 isn’t nearly as important as the fact that it’s a 30-series GPU. Even as nothing but a vessel for DLSS and ray tracing, it’s still more impressive than AMD’s competing graphics card.
Specs
The RTX 3050 is a true budget graphics card, and it comes with the specs to match. Sitting at the bottom of Nvidia’s current lineup, the card shaves a number of cores off of the RTX 3060, cuts the power draw by nearly half, and limits the amount of video memory. Unlike some recent GPU releases I’ve seen, though, the RTX 3050 doesn’t have problems based on the spec sheet.
| CUDA cores | Boost speed | Memory capacity | TDP | Price | |
| RTX 3050 | 2,304 | 1.74GHz | 8GB GDDR6 | 90W | $249 |
| RTX 3060 | 3,584 | 1.77GHz | 12GB GDDR6 | 170W | $329 |
| RTX 3060 Ti | 4,864 | 1.67GHz | 8GB GDDR6 | 200W | $399 |
| RTX 3070 | 5,888 | 1.73GHz | 8GB GDDR6 | 220W | $499 |
Compared to RTX 3060, the most striking change is the 8GB of GDDR6 memory. The RTX 3050 squeezes that memory through a smaller 128-bit bus, cutting the memory bandwidth down to 224GB/s. In addition, the RTX 3050 drops about 36% of the CUDA cores of the RTX 3060.
For that, the card runs at a much lower wattage. 90W is all you need for the base spec, meaning you can get buy with a 250W power supply. Power limits continue to climb, and for the first time, we have an RTX 30-series graphics card that runs below 100W.
Compared to AMD, the RTX 3050 stands out thanks to its PCIe interface. Like most current-gen GPUs, the RTX 3050 supports PCIe 4.0. The RTX 3050 supports 16 lanes — unlike the recently released RX 6500 XT, though. That should give systems locked to PCIe 3.0 — every platform below 12th-gen Intel and AMD Ryzen 5000 — uninterrupted bandwidth.
Gaming performance
The main competitor to the RTX 3050 is AMD’s RX 6500 XT. I don’t have an RX 6500 XT to test right now — though, I will update this review with benchmarks once my unit arrives — but I still wanted to get an idea about how Nvidia’s latest budget attempt stacks up. I subbed in AMD’s RX 580. It’s an older GPU, but the benchmarks I’ve seen show that it performs around the level of an RX 6500 XT.
To eliminate the CPU, I ran my tests on the latest build of Windows 10 with a Ryzen 9 5950X and 32GB of memory. Here are my results at 1080p with the highest graphics preset:
| RTX 3050 | RTX 3060 | RX 6600 | RX 580 | |
| 3DMark Time Spy | 6,749 | 8,629 | 8,071 | 4,820 |
| Red Dead Redemption 2 | 52 fps | 65 fps | 59 fps | 35 fps |
| Fortnite | 79 fps | 132 fps | 98 fps | 56 fps |
| Assassin’s Creed Valhalla | 55 fps | 64 fps | 71 fps | 42 fps |
| Battlefield V | 92 fps | 123 fps | 120 fps | 74 fps |
Out of the suite, the RTX 3050 only managed above 60 frames per second (fps) in Battlefield V and Fortnite. It’s not much of a surprise, but the card couldn’t manage that coveted frame rate target in Red Dead Redemption 2 or Assassin’s Creed Valhalla. The RTX 3050 is a 1080p graphics card, but it’s not targeting the highest graphics preset.
Lower graphics presets were much more impressive — 64 fps in Assassin’s Creed Valhalla, and 134 fps in Battlefield V. In 2022, most graphic cards don’t make you choose a lower graphics preset at the proper resolution. The RTX 3050 does, but that’s not a bad thing. If anything, it showcases how little the highest preset does and how much performance you can gain by bumping down the settings.
Compared to the RX 580, you can see how much faster a budget GPU should be in 2022. The RTX 3050 was about 40% faster in 3DMark Time Spy, 41% faster in Fortnite, and 24% faster in Battlefield V. I haven’t had the chance to test the RX 6500 XT yet, but I’ve seen enough to say that the RTX 3050 is the faster card.
The RTX 3050 is about 20% slower than the RTX 3060 but 25% cheaper.
That’s looking at bottom of the barrel options, though. In the opposite direction, the RTX 3050 was about 20% slower than the RTX 3060 in Red Dead Redemption 2. In Battlefield V, the difference was even larger at 25%. The RTX 3060 hits a sweet spot that the RTX 3050 can’t manage. That said, the RTX 3050 is about 25% cheaper and only 20% slower.
There were problems outside of raw performance. The memory caused issues that don’t show up in average frame rates. In Battlefield V, my first few runs resulted in minimum frame rates in the single digits, manifesting as stutters as I played through. This is the smaller memory bus and 8GB of VRAM at play. In titles with a lot of high-resolution textures, there was some stuttering as the game loaded and the assets were pulled into memory.
Still, the RTX 3050 lands where it should. And compared to the competition that AMD is presenting right now, that’s great. I still think the RTX 3060 and RTX 3060 Ti hit the price/performance mark better than the RTX 3050; however, there’s a good chance the RTX 3050 will sell for significantly less than those cards on the secondhand market.
Content creation performance
The RTX 3050 is a gaming graphics card, and you should pick up something more powerful if plan on using it primarily for 3D modeling or rendering. I still wanted to throw the card to a few content creation benchmarks to see how it stacks up, and although the results aren’t terrible, they aren’t great either.
| RTX 3050 | RTX 3060 | RX 6600 | RX 580 | |
| Blender BMW (lower is better) | 76 seconds | 45 seconds | 86 seconds | 168 seconds |
| Blender Classroom (lower is better) | 279 seconds | 208 seconds | 167 seconds | 370 seconds |
| Blender Koro (lower is better) | 227 seconds | 162 seconds | 156 seconds | N/A |
| Pugetbench for Premiere Pro | 766 | 703 | 605 | 603 |
Across the three Blender renders, the RTX 3050 was about 32% slower than the RTX 3060 and similarly slow compared to the RX 6600. It had a better showing in PugetBench for Premiere Pro, but as is the case with the RX 6600 and RTX 3060, this benchmark is leaning heavily on the CPU and system memory.
Compared to the RX 580, it’s no contest. The RTX 3050 can leverage CUDA for rendering, unlike the RX 6600 and RX 580, which leads to faster render times than OpenCL. I saw much higher render times with the RX 580, and in the case of the Koro render, I couldn’t even complete the test.
Make no mistake: The RTX 3050 is not a good graphics card for content creation. It can hold its own, but upgrading to a higher class of graphics card — either from AMD or Nvidia — will pay off exponentially.
DLSS and ray tracing
For the first time in a while, Nvidia is standing apart not on raw performance but a list of features. DLSS is an essential feature for the most demanding games, and if nothing else, the RTX 3050 provides a way to use DLSS in games like Cyberpunk 2077 and Control. It also offers hardware-accelerated ray tracing, which works much better than the competition from AMD.
| RTX 3050 | RTX 3060 | RX 6600 | |
| Control (no RT) | 58 fps | 76 fps | 67 fps |
| Control (High RT) | 35 fps | 47 fps | 27 fps |
| Control (High RT + DLSS) | 62 fps | N/A | N/A |
| Cyberpunk 2077 (no RT) | 47 fps | 59 fps | 46 fps |
| Cyberpunk 2077 (Ultra RT) | 23 fps | 28 fps | 10 fps |
| Cyberpunk 2077 (Ultra RT + DLSS) | 47 fps | N/A | N/A |
My results above were run with the same test bench at 1080p with the highest graphics preset. I included the RTX 3060 and RX 6600 for reference, not as competition for the RTX 3050. These two cards are in a class above the RTX 3050, and they unsurprisingly perform better across the board.
That said, I didn’t anticipate how close the RTX 3050 would be to the RX 6600. With ray tracing turned on, you can see how quickly the RX 6600 falls apart. In Control, where the two GPUs managed almost identical average frame rates, the RX 6600 sunk much lower than the RTX 3050 with ray tracing on.
DLSS is the best feature of the RTX 3050 — no contest.
It’s a testament to how solid Nvidia’s ray tracing cores are, but really, you wouldn’t play either of the games above at their ray tracing frame rates. That’s where DLSS steps in. Even in the modest Balanced mode, the RTX 3050 maintained performance as if ray tracing was turned off. In the case of Control, the average frame rate was actually higher.
DLSS isn’t in every game, but the list of supported titles continues to grow. For a large chunk of major AAA releases, which would otherwise be unplayable on the RTX 3050, DLSS makes playing new games with all of the visual bells and whistles possible. It’s the best feature of the RTX 3050 — no contest.
Our take
The RTX 3050 is a graphics card that wins by default. Stacked up against the tragic RX 6500 XT, Nvidia could’ve released almost any graphics card and come out ahead. On its own, the RTX 3050 is a good graphics card that manages to deliver performance that scales with its price, and that’s all I can ask for.
It earns an extra point on the back of DLSS, which catapults the RTX 3050 from a good — but not great — GPU into a go-to option for gamers on an extreme budget. Prices are inflated now, but hopefully we’ll see plenty of $250 RTX 3050s by the end of the year — much unlike Nvidia’s recently released 12GB RTX 3080.
Are there any alternatives?
Not right now. Nvidia skipped this price tier with the previous generation, and AMD’s RX 6500 XT falls woefully short of the RTX 3050. The only alternatives are Nvidia’s more premium GPUs. Hopefully, by the end of 2022, you’ll be able to find something like an RTX 2070 or RTX 2060 Super for around the same price.
How long will it last?
The RTX 3050 isn’t built for the future. It barely meets the mark for 1080p AAA gaming right now, and within a few years, you’ll struggle to hit sustainable frame rates at the highest graphics settings. If you are OK with bumping down your settings, or you primarily play less demanding games, it should last four to five years.
DLSS helps a lot, too. Assuming the list of DLSS games continues to grow, you’ll be able to squeeze performance out of the RTX 3050 for many years to come.
Should you buy it?
If you can find the RTX 3050 at list price, you should buy it. After launch, it comes down to what price you can find the RTX 3050 at. It’s a solid graphics card, but you’ll be better off with the RTX 3060 or RTX 3060 Ti if you can find one for a reasonable price.