Shavings Shower is a revolutionary new product that allows you to enjoy the benefits of a shower without the hassle of taking one!
Shavings Shower is the perfect solution for busy people who don’t have time for a traditional shower. With Shavings Shower, you can simply step into your shower stall, close the door, and let the water run over you while you shave, shampoo, or even just relax.
Shavings Shower is also great for people who live in small spaces, such as apartments or dorm rooms, where a traditional shower is not an option. With Shavings Shower, you can have all the benefits of a shower without taking up valuable space in your home.
“alignnone size-full wp-image-615073 lazy” src=”https://www.tipsclear.com/wp-content/uploads/2022/04/shavings-shower.jpg” alt=”” width=”1023″ height=”1200″ data-=”” />
Shavings Shower
Last spring I reorganized my shop and moved my planer near the garage door so it could spew its shavings harmlessly onto the driveway. Now that it’s colder, I work with the garage door closed. One night recently I planed a bunch of boards for a new project. Chips and shavings piled high on the closed door’s horizontal ribs. But it was late, so I decided to clean up the mess later.
The next morning my partner started a new job. Wearing a favorite fuzzy sweater, she pushed the garage door opener and headed out through the garage to her car, which was parked outside. Unfortunately, she walked under the opening door just as its shavings-loaded section rounded the curve above her head.
Hearing a hideous shriek, I raced to the garage. There stood a shocked and disoriented creature that had just received an unexpected—and prickly—shower. Her perfectly coiffed hair was loaded with wood chips—but that was nothing compared to her sweater. Its soft fuzz had trapped the shavings like a magnet. –Jayne Thorson
Angle Tangle
My wife asked me to build a wall-mounted coat rack for the entryway in our new house. I bought a suitable board and four nice-looking spindles for the project. Then I carefully designed and built a jig that would allow drilling holes in the board at exactly 15° so the spindles would angle slightly.
I clamped the jig onto the drill press table and started drilling. The first two holes were perfect. But when I moved the board to drill the third hole, it bumped into the tool cabinet that stood next to the drill press. No big deal. I turned the board around and drilled from the opposite end. It wasn’t until I installed the spindles that I realized that the last two holes were drilled at opposite angles to the first two holes.
My dual-angle rack now hangs by the back door, where it remains a somewhat useful addition as well as a of conversation and laughter. –Gerry Saunders
I had to remove the spindles and re-drill two of the four holes. The moral of this story: Measure twice, drill once—or you might have to measure thrice and drill twice. –John Wiedman
Sawdust SNAFU
While working on a project recently, I discovered that one of my blades was getting dull. So I swapped it out for a new one. Unfortunately, I forgot to unplug the saw before changing the blade. In my haste, I managed to give myself a nasty shock.
It was a painful reminder of the importance of safety in the shop. Always remember to unplug your tools before changing blades or doing any other type of maintenance. –Chuck Hedges