Sheet goods, such as plywood, OSB, and particle board, are often used in construction projects. While these materials are strong and durable, they can be difficult to transport due to their size and weight. A Sheet Goods ATV is a specially designed vehicle that makes it easy to move sheet goods from one location to another.
These vehicles are equipped with a flatbed trailer that can accommodate large sheets of material. Sheet Goods ATVs also have a hydraulic lift that allows the operator to raise and lower the bed, making it easy to load and unload materials.
With their strong construction and versatile design, Sheet Goods ATVs are an essential tool for any construction project.
My shop is in a walkout basement with a steep grassy slope from the driveway. The skateboard-like devices made for moving stock work well on hard surfaces, but not on grass. My solution is an 8-ft. long two-wheeled cart.
To build the cart, start with a 2-1/2″ wide strip of 1/4″ plywood, 8 ft. long. Glue and screw two 3/4″ square wood rails flush with each edge leaving a 1″ space between them. Fasten a stop block between the rails at one end. It doesn’t matter if the rails go all the way to the other end.
Attach 7” lawn mower wheels with 3” lag screws and washers to the ends of a 2×4, 18” long. Screw and glue the 2×4 axle assembly to the plywood about 5 ft. from the stop block end.
To use the cart, load the sheet on edge between the rails with one end against the stop block. Lift the top corner of the sheet on the stop block end and roll it wherever you need it.